Use of calcination in Sentences. 40 Examples
The examples include calcination at the start of sentence, calcination at the end of sentence and calcination in the middle of sentence
For urdu meanings and examples of calcination click here
calcination at the end of sentence
- Results The IR spectrometry of Ophicalcitum was different before and after calcination.
- Results The IR spectrometry of Ophicalcitum was different before and after calcination.
- Chloric water still can stimulate an eye possibly, make an eye aglow , scratchy, the feeling that has calcination.
- Chloric water still can stimulate an eye possibly, make an eye aglow , scratchy, the feeling that has calcination.
- Objective To explore if the IR spectra analysis is useful for learning the Ophicalcitum, compare with the character of IR spectrometry before and after calcination.
calcination in the middle of sentence
- And the calcination time is the most important factor.
- The better your calcination for certain you shall make.
- The maxim strength is found when calcination temperature is 600 ℃.
- The maxim strength is found when calcination temperature is 600 ℃.
- Of pore silica gel, calcination temperature should not exceed 200 ℃.
- Of pore silica gel, calcination temperature should not exceed 200 ℃.
- A series of niobium acids at different calcination temperatures was prepared.
- A shrinking core model is used to account for the calcination process of ultra - fine limestone.
- A shrinking core model is used to account for the calcination process of ultra - fine limestone.
- Monument body such as the well - illuminated calcination of gold, Wuli also can be seen outside.
- Limestone moves downward driven by the push rods, which can ensure the calcination quality of limestone.
- Limestone moves downward driven by the push rods, which can ensure the calcination quality of limestone.
- New type flashing - speed dynamic calcination technology is used for the production of active nano - ZnO.
- New type flashing - speed dynamic calcination technology is used for the production of active nano - ZnO.
- By adding only 5% kaolinite in the calcination process, the dealkalization rate could be increased to 100%.
- The pore volume and specific surface area of the samples decreased with the increasing calcination temperature.
- The pore volume and specific surface area of the samples decreased with the increasing calcination temperature.
- The influence of the calcination temperature on the catalytic activity of o - xylene isomerization was investig.
- The influence of the calcination temperature on the catalytic activity of o - xylene isomerization was investig.
- A new technology for the preparation of cadmium red pigment - indirect sedimentation - calcination method has been studied.
- This technology changes the ore magnesium, calcium carbonate and fertilizer through calcination, separation, carbonization and roasting.
- This technology changes the ore magnesium, calcium carbonate and fertilizer through calcination, separation, carbonization and roasting.
- The influence of the calcination temperature on the catalytic activity of zeolitefor the reaction of o-xylene isomerization was investig.
- The influence of the calcination temperature on the catalytic activity of zeolitefor the reaction of o-xylene isomerization was investig.
- Experiment research conducted on calcination of kaolinite from coal measure regarding the influential factors on whiteness of the final product.
- In this paper copper oxide ( CuO ) crystals were successfully synthesized by a novel concentration - precipitation and post - calcination method.
- Results reveal that the impregnation, drying, calcination and sulfidation are all important processes for the mechanical strength and reliability.
- Results reveal that the impregnation, drying, calcination and sulfidation are all important processes for the mechanical strength and reliability.
- That the calcination process will change the graininess, dispersity and acidity-basicity of the catalyst can explain the discrepancy of the above phenomena.
- Results reveal that the impregnating, drying, calcination and sulfidation are all important processes for the mechanical strength and reliability of the catalyst.
- The calcination of HZSM-5 zeolite treated by sulfur acid not only could improve its acid quantity, but also increased strong acid sites with structure of super acid.
- The results showed:reductive agent, solvent P/V ratio, condition of drying and temperature of calcination had influence over the physical properties of VPO catalysts.
- The results showed:reductive agent, solvent P/V ratio, condition of drying and temperature of calcination had influence over the physical properties of VPO catalysts.
- The results indicate that the carbide slag after proper calcination can be used to prepare the pure xonotlite which was made up of many big orbicular secondary particles.
- ITO powders having a very low Chlorine content were prepared by a novel sequential wash and subsequent post - calcination method using Indium Chloride as staring material.
